Taking care of your device
Your device is a product of superior design and craftsmanship and should be treated with care. The following suggestions
will help you protect your warranty coverage.
•
Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain minerals that will
corrode electronic circuits. If your device does get wet, remove the battery, and allow the device to dry completely
before replacing it.
•
Do not use or store the device in dusty, dirty areas. Its moving parts and electronic components can be damaged.
•
Do not store the device in high or cold temperature. High temperatures can shorten the life of electronic devices,
damage batteries, and warp or melt certain plastics. When the device warms to its normal temperature from a cold
temperature, moisture can form inside the device and damage electronic circuit boards.
•
Do not attempt to open the device other than as instructed in this guide.
•
Do not drop, knock, or shake the device. Rough handling can break internal circuit boards and fine mechanics.
•
Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device. Only use a soft, clean, dry
cloth to clean the surface of the device.
•
Do not paint the device. Paint can clog the moving parts and prevent proper operation.
•
Use only the supplied or an approved replacement antenna. Unauthorised antennas, modifications, or attachments
could damage the device and may violate regulations governing radio devices.
•
Use chargers indoors.
•
Backup all data you want to keep, such as contacts and calendar notes.
144 Product and safety information
•
To reset the device from time to time for optimum performance, power off the device and remove the battery.
These suggestions apply equally to your device, battery, charger, or any accessory.